(949) 407-8904 Mon - Fri 08:00 - 17:00 23661 Birtcher Dr., Lake Forest, California, USA
(949) 407-8904 Mon - Fri 08:00 - 17:00 23661 Birtcher Dr., Lake Forest, California, USA

Category

Case Study
how to clean deposition materials shipped in oil
In order to protect some deposited materials from reacting with air or water vapor, they are usually immersed in low-viscosity (hydrocarbon) mineral oil during storage and shipment. Before installing these composition materials shipped in oil into the vacuum system, we must use solvents to remove these oils. The choice of solvents is based on the premise...
Continue Reading
Effect of Silver Additives on the Conductivity of Indium Tin Oxide Sputtered Films
Transparent conductive films have many applications, and indium tin oxide films have received great attention in the glass manufacturing industry due to their excellent properties. However, the manufacturing process of the indium tin oxide film requires a higher temperature, which limits its application. In order to reduce this temperature, various “sintering agents” have been taken...
Continue Reading
Silver Film Deposition on Glass Surface
The case A well-known industrial glass company—-We attempted to deposit a silver film about one micron thick on the glass substrate using silver evaporation materials by vacuum evaporation. And our existing coating facilities are limited that we can only use electron beam evaporation. We tried Ag / Ti glass in the beginning, but the silver...
Continue Reading