|Particle Size||-75 +38 µm; -75 +30 µm; -45 +16 µm|
Molybdenum Powder for Thermal Spraying
Stanford Advanced Materials (SAM) provides high quality molybdenum powder used for thermal spraying coatings.
The materials of thermal spraying coatings are commonly in forms of powder, wire or rod. They are heated and convert to micrometer-size particles. Then the particles are accelerated towards substrates and create a coating. Molybdenum powder for thermal spraying is often used to manufacture engine pistons and synchronizer rings in the automotive industry because of its low friction coefficient, high sliding wear resistance and ductility. Coatings of molybdenum provide good frictional properties and scuff resistance as a result of an adherent, oxide surface layer that forms rapidly after spraying. The coatings are also hard and lubricious in nature, offering excellent dry-running properties.
|Particle Size & Process||-75 +38 µm; Agglomerated & Densified
-75 +30 µm; Sintered & Crushed
-45 +16 µm; Agglomerated & Sintered
Molybdenum powder is often used in applications require:
-Tough and hard with excellent sliding properties and good running properties
-Resists fretting and electric arc erosion
Our molybdenum powder is clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.
Submit your review