|Appearance||Gray metallic powder|
Stanford Advanced Materials (SAM) provides L605 Alloy Powder (UNS R30605) suitable for 3D Printing applications. As the additive manufacturing industry advances, so will our additive manufacturing powder product offerings.
L605 Alloy (UNS R30605) Powder is a non-magnetic cobalt-based superalloy. L605 Alloy maintains good strength up to 2150°F. L605 requires a minimum yield strength of 45,000 psi at room temperature. L605 maintains good oxidation resistance up to 1900° F. It has a unique ability to resist corrosion in very severe environments. Highly resistant to hydrochloric acid, nitric acid and wet chlorine, the alloy also has good sulfidation resistance and resistance to wear and galling.
|Product Name||L605 Alloy (UNS R30605) Powder|
|Alloy Grade||GH605, L605|
Fe 17-20Mn 1 max
Si 1 max
P 0.04 max
S 0.03 max
Cu 0.5 max1
L605 Alloy Powder can be used in the hot sections of aircraft and land-based gas turbines in combustor liners and other applications requiring moderate strength and good oxidation resistance at high temperatures. L605 Alloy is the strongest of the formable cobalt alloys, useful for continuous service to 1800°F. Because of long and widespread use, this alloy has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well-characterized material. The alloy can also be used in industrial furnace applications such as muffles and liners in high-temperature kilns.